Learning paths › FortiSwitch › Switching Basics
Switching Basics
VLANs, trunks and loop prevention on FortiSwitchOS.
Lessons
- Disable one port and keep the change that narrow
- Disable three ports in one edit session
- Send one frame and account for every address in it
- Watch ARP resolve before the first ICMP packet
- Find the edge of a broadcast domain
- Work out which ports share a flood domain
- Create three VLAN objects with descriptions
- Repair a VLAN database with the smallest possible edit
- Assessment: build the VLAN objects and verify them independently
- Give three ports an access VLAN policy
- Prove same-VLAN forwarding between two ports
- Choose between an endpoint policy and a tagged inter-switch link
- Carry a VLAN tagged across an inter-switch link
- Move the untagged VLAN to a dedicated id on both ends
- Repair a native VLAN mismatch and test the VLAN it affected
- Restore a VLAN that was left out of the allowed list
- Assessment: verify the inter-switch VLAN policy on both ends
- Explain a Layer 2 loop and the role of the CIST
- Enable spanning tree in the switch STP settings
- Place the root bridge with an STP instance priority
- Declare host-facing ports as edge ports
- Latch an edge port with BPDU guard and reset it by hand
- Explain what a switch trunk buys and what it costs
- Build a switch trunk with LACP active members
- Clear a trunk's members before rebuilding it
- Assessment: build the LACP trunk and place the CIST root