Learning paths › Aruba AOS-CX › Campus Switching
Campus Switching
VLANs, trunks and loop prevention on AOS-CX.
Lessons
- Take a port-state baseline before changing anything
- Describe two ports and scope the evidence to the current context
- Shut one port and bring another up
- Restore one disabled port and leave the rest alone
- Apply one change across a range of ports
- Read negotiated speed, duplex and counters on one port
- Send one frame and account for every address in it
- Predict known unicast, unknown unicast and broadcast handling
- Watch the MAC address table learn from traffic
- Filter the MAC address table by VLAN, port and learning type
- Watch ARP resolve before the first ICMP packet
- Find the edge of a broadcast domain
- Work out which ports share a flood domain
- Create a named VLAN and verify just that VLAN
- Build a three-VLAN database to the design's exact values
- Tell a missing VLAN apart from a mislabelled one
- Assessment: build a VLAN database and verify it independently
- Make a port a Layer 2 access port in VLAN 10
- Place a range of ports into one access VLAN
- Prove same-VLAN forwarding between two access ports
- Move one misplaced access port and retest the symptom
- Read per-port VLAN membership for a handover
- Assessment: audit access-port placement and prove it
- Choose between access and trunk policy on a link
- Configure a trunk with an explicit allowed VLAN
- Follow a tag across two switches using local MAC evidence
- Replace and subtract entries in a trunk allowed set
- Tag the native VLAN on an AOS-CX trunk
- Diagnose an asymmetric native VLAN mismatch
- Restore a VLAN to the allowed set without breaking the other
- Assessment: verify trunk allowed and native policy
- Explain a Layer 2 loop and what MSTP does by default
- Read the MST topology and find the non-forwarding link
- Define the MST region and map a VLAN to an instance
- Place the MSTI root with instance priority
- Declare host-facing ports as administrative edge ports
- Guard an edge port against an unexpected BPDU
- Explain what a LAG gives you and what it does not
- Build a LAG and apply the VLAN policy to the logical interface
- Compare LACP active, LACP passive and a static LAG
- Detach a port from one LAG before attaching it to another
- Read LACP aggregate and member state, then fail a member
- Assessment: build the LAG and place the MSTI root
- Assessment: commission a campus switch end to end