Learning paths › Arista EOS › EOS Layer 2
EOS Layer 2
VLANs, trunks and loop prevention the Arista way.
Lessons
- Read the interface status table before changing anything
- Describe two ports and read the description back
- Shut one port and bring another up
- Repair an administratively disabled port and nothing else
- Change a range of ports in one command
- Read duplex, speed and counters on a single port
- Send one frame and name every header it needs
- Predict forward, flood and filter from the status table
- Watch the MAC address table learn an address
- Narrow the MAC address table by VLAN and by port
- Watch ARP resolve before ICMP can be sent
- See where a broadcast domain ends
- Work out which ports share a flood domain
- Create a named VLAN and verify it in the VLAN table
- Create three VLANs with a consistent naming scheme
- Tell a missing VLAN apart from a mislabelled one
- Assessment: build a VLAN database and verify it independently
- Make a port an access port in VLAN 10
- Place three ports in the same VLAN and bound the change
- Prove same-VLAN forwarding with a ping
- Find a port in the wrong VLAN and move only that port
- Read a port's switchport view for a handover
- Assessment: audit access-port placement and prove it
- Decide between an access port and an 802.1Q trunk
- Configure a trunk and restrict it to one VLAN
- Identify the far end with LLDP and the MAC it taught us
- Add to, remove from and replace a trunk allowed list
- Set the native VLAN on both ends of a trunk
- Repair a native VLAN mismatch on a trunk
- Add the VLAN a trunk was never allowing
- Assessment: verify a trunk's allowed and native VLANs
- Explain what a Layer 2 loop does to a switch
- Read the spanning-tree topology and find the blocked path
- Put both switches into MSTP mode
- Place the root bridge with MST instance priority
- Mark an endpoint port as an edge port
- Explain what a port channel buys and what it costs
- Add a port to a channel group with LACP active
- Compare LACP active and passive on the same port
- Repair a port channel whose members disagree on protocol
- Fail a port-channel member and read what survives
- Assessment: aggregate the uplinks and place the MST root