BuildTheNet

Opening your workspace

Your learning content and tools are loading.

Static Routing

show ip route static

Shows only the static routes that are installed in the routing table.

Written by a working field network engineer · CCNA, Security+, CySA+

Filters the routing table to static routes only. Use it to confirm a static route you just added is actually installed, not merely configured.

Example output

R2#show ip route static
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

S     172.16.0.0/16 [1/0] via 10.0.12.1

Reference output: hand-written in standard Cisco IOS format for this example network, not captured from a device.

Useful variants

What each column or field means

FieldMeaning
SA static route. S* is a static default route.
[1/0]Administrative distance 1 (the default for static routes) and metric 0. A floating static backup shows a higher AD, such as [5/0].
via 10.0.12.1The next hop. A route with only an exit interface shows “is directly connected, <interface>” instead.

When it doesn’t look right

The route is in the running-config but not here.

The next hop is not reachable through any connected route, or the exit interface is down. Static routes are only installed when they can be used.

A floating static route never appears.

That is expected while the primary route exists: its higher AD keeps it out of the table until the primary disappears.

Gateway of last resort is not set on a branch router.

Add ip route 0.0.0.0 0.0.0.0 <next-hop>, or have the edge router advertise one with default-information originate in OSPF.

Related commands

Try it yourself

Learn it in the CCNA path

Topic

Static Routing — Read the routing table, add static and default routes in both directions, and prove reachability with ping and traceroute.

All 57 commands