BuildTheNet

Opening your workspace

Your learning content and tools are loading.

OSPF

show ip route ospf

Shows only the routes learned from OSPF, with their administrative distance, metric and next hop.

Written by a working field network engineer · CCNA, Security+, CySA+

Filters the routing table to routes learned from OSPF. If a network is in the OSPF database but not here, a better source (lower AD) or a more specific prefix is winning.

Example output

R1#show ip route ospf
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is 203.0.113.1 to network 0.0.0.0

O     192.168.20.0/24 [110/2] via 10.0.12.2, 00:14:32, GigabitEthernet0/1

Reference output: hand-written in standard Cisco IOS format for this example network, not captured from a device.

Useful variants

What each column or field means

FieldMeaning
O / O IA / O E2Intra-area, inter-area (from another area via an ABR) and external (redistributed) OSPF routes.
[110/2]OSPF’s administrative distance 110, and the total cost to the destination (here 1 for R1’s Gi0/1 plus 1 for R2’s Gi0/0).
via 10.0.12.2The OSPF neighbor used as next hop.

When it doesn’t look right

A route is learned by OSPF but a static route is used instead.

Static routes have AD 1 and beat OSPF’s 110. Remove the static route, or make it a floating backup with a higher AD.

No OSPF routes at all.

Check neighbors first. With no FULL adjacency there is nothing to learn.

Related commands

Try it yourself

Learn it in the CCNA path

Topic

OSPF — Enable single-area OSPFv2, form neighbor adjacencies, read the neighbor and interface tables and confirm learned routes.

All 57 commands